Caterpillar 3126B, 3126E BKD, G3E Engine Disassembly & Assembly Manual 

Covers: Caterpillar 3126B and 3126E On-Highway Truck Engine

• BKD 1-Up
• G3E 1-Up
• DPF 1-Up
• 1AJ 1-Up
• 8YL 1-Up
• CKM 1-Up
• CRP 1-Up
• 7AS 1-Up
• 8SZ 1-Up
• 9SZ 1-Up

  Topics in the Caterpillar 3126B, 3126E Disassembly and Assembly Shop Manual:

  Fuel Filter Base – Remove
  Fuel Filter Base – Install
  Fuel Transfer Pump – Remove
  Fuel Transfer Pump – Install
  Fuel Pressure Regulator – Remove and Install
  Unit Injector – Remove
  Unit Injector – Install
  Unit Injector Sleeve – Remove
  Unit Injector Sleeve – Install
  Injection Actuation Pressure Control Valve – Remove
  Injection Actuation Pressure Control Valve – Disassemble
  Injection Actuation Pressure Control Valve – Assemble
  Injection Actuation Pressure Control Valve – Install
  Unit Injector Hydraulic Pump – Remove
  Unit Injector Hydraulic Pump – Install
  Turbocharger – Remove
  Turbocharger – Install
  Exhaust Manifold – Remove and Install
  Exhaust Particulate Filter – Disassemble
  Exhaust Particulate Filter – Assemble
  Air Inlet Heater Solenoid – Remove and Install
  Air Inlet Cover – Remove and Install
  Inlet and Exhaust Valves – Remove and Install
  Inlet and Exhaust Valve Guides – Remove and Install
  Inlet and Exhaust Valve Seat Inserts – Remove and Install
  Engine Oil Filter Base – Remove
  Engine Oil Filter Base – Disassemble
  Engine Oil Filter Base – Assemble
  Engine Oil Filter Base – Install
  Engine Oil Pump – Remove
  Engine Oil Pump – Disassemble
  Engine Oil Pump – Assemble
  Engine Oil Pump – Install
  Water Pump – Remove
  Water Pump – Disassemble
  Water Pump – Assemble
  Water Pump – Install
  Water Temperature Regulator – Remove and Install
  Flywheel – Remove
  Flywheel – Install
  Crankshaft Rear Seal – Remove
  Crankshaft Rear Seal – Install
  Crankshaft Wear Sleeve (Rear) – Remove (If Equipped)
  Crankshaft Wear Sleeve (Rear) – Install
  Crankshaft Rear Seal Carrier – Remove and Install
  Flywheel Housing – Remove and Install
  Rear Power Take-Off (RPTO) – Remove
  Rear Power Take-Off (RPTO) – Install
  Vibration Damper and Pulley – Remove and Install
  Crankshaft Front Seal – Remove
  Crankshaft Front Seal – Install
  Front Cover – Remove
  Front Cover – Install
  Housing (Front) – Remove
  Housing (Front) – Install
  Camshaft Idler Gear – Remove and Install
  Valve Mechanism Cover – Remove and Install
  Valve Mechanism Cover Base – Remove and Install
  Rocker Shaft and Pushrod – Remove
  Rocker Shaft – Disassemble
  Rocker Shaft – Assemble
  Rocker Shaft and Pushrod – Install
  Cylinder Head – Remove
  Cylinder Head – Install
  Lifter Group – Remove and Install
  Camshaft – Remove
  Camshaft – Install
  Camshaft Gear – Remove and Install
  Camshaft Bearings – Remove and Install
  Engine Oil Pan – Remove and Install
  Piston Cooling Jets – Remove and Install
  Pistons and Connecting Rods – Remove
  Pistons and Connecting Rods – Disassemble
  Pistons and Connecting Rods – Assemble
  Pistons and Connecting Rods – Install
  Connecting Rod Bearings – Remove
  Connecting Rod Bearings – Install
  Crankshaft Main Bearings – Remove
  Crankshaft Main Bearings – Install
  Crankshaft – Remove
  Crankshaft – Install
  Crankshaft Gear – Remove and Install
  Bearing Clearance – Check
  Atmospheric Pressure Sensor – Remove and Install
  Coolant Temperature Sensor – Remove and Install
  Engine Oil Pressure Sensor – Remove and Install
  Engine Oil Temperature Sensor – Remove and Install
  Injection Actuation Pressure Sensor – Remove and Install
  Speed/Timing Sensor – Remove and Install
  Boost Pressure Sensor – Remove and Install
  Inlet Air Temperature Sensor – Remove and Install
  Idler Pulley – Remove
  Idler Pulley – Disassemble
  Idler Pulley – Assemble
  Idler Pulley – Install
  Belt Tensioner – Remove and Install
  Belt Tightener – Remove
  Belt Tightener – Disassemble
  Belt Tightener – Assemble
  Belt Tightener – Install
  Fan Drive Mounting Group – Remove and Install
  Fan Drive – Remove
  Fan Drive – Install
  Engine Control Module – Remove and Install
  Alternator – Remove and Install
  Electric Starting Motor – Remove and Install
  Air Compressor – Remove and Install
  Air Compressor Drive Gear – Remove and Install

• Pages: 104
  Format: PDF
  Compatibility: Windows/Mac/Tablet